Відео

अगर आता हो तो मुझै काम मिल सकता है क्या सर

It might be silly but being a young artist I really wish u could have a greenhause litteraly MADE of stained glass. Do you think its even possible?

Waoooo me emociona tanto ver esta belleza 😢😢😢 hasta la lagrima se me salió, me estremece ver tanto talento y tanta generosidad al compartirnos estos momentos de creación, GRACIAS ❤❤❤ ESTO ES LA MAGIA DEL ARTE!!!! QUE ALIMENTA EL ALMA

Horses for courses, methinks?

Derek, is that a Hakko temp control iron you're using at the beginning? I've had the usual Weller 100w @ 6mm for years, and now I've returned to st. glass after many years, I think my Weller is way too hot. It turns 50/50 to water, and other sized bits are like pulling teeth to find. Am I better off investing in the Hakko to have temperature adjustment for each solder and came/foil? Also, I've seen opposing advice on soldering foil. One says to use freer flowing 60/40 to gap fill, then round off with 50/50. The other says exactly the opposite. How do we tell who's accurate? Your tip cleaner pad seems to indicate on the package that it's not for lead. Am I misreading it, before I purchase one?

Dear Artist and teacher Derek Hunt, I have done some experiments with oxides. I have taken a small course on glass painting with oxides in university. The results are uploaded on my account. you can see on my account's latest video by Just visiting the account.

Great thanks

Hard to sustain art when there's virtually nothing left of the underlying culture

I have a rounded sunglasses. I need to cut them down around the edges. It looks like wolverine so I'd like to cut the top.

Such an informative video. You are a great teacher.

Really cool i see im one of a few here that came so see what i was doing wrong after the mistake was done 🤣 when i was cutting i saw that the glass sometimes broke where i didnt even cut on the inside of the line and outside. I suppose my tools wasnt sharp enough or perhaps i was using to much force

Absolutely magical

Heavenly, Celestial !

Protestant stained glass is so impersonal. Vibrancy in the art is not only in design and color but in the story communicated. Mere symbols don’t communicate a narrative. Saints in their settings and depictions of biblical stories bring a vitality to the interaction with the viewer.

Astounding. This is my third time to watch this video, and I get more out of it each time. It is so impressive to watch that my brain stops hearing the words and I’m making involuntary comments, oohing and wowing. Next time I will hear more of what is being said, but it is just so beautiful to watch this…

Hello! I see you hold it at a 45 angle when you cut and do mention it, but before you say you want to hold it at 90°, why mention the 90?

9:41 thank you for sharing other channels that I can go to for further learning on how to properly create my stained glass art!

Hi 👋 first time viewer and now subscriber here! Somehow UA-cam brought me to Glass staining making channels 🤷‍♀️ But it has awakened the artist in me, and has reminded me about how I used to as a teen draw and carve on mirrors designs that I thought were pretty, for myself. This was back in the early 2000s, And it was just something that popped into my head cuz I love to draw. And I never really thought that it was something that anybody else would enjoy. But these channels have definitely inspired me to want to learn how to create stained glass art, especially art pieces that I haven't seen out there of fandom things that I love! I hope to binge watch your channel and learn everything I can learn as a beginner so I can create my designs and maybe one day share them with others!

Gracias por todo lo que compartes es oro molido como el amarillo de plata gracias ❤

😮

A gas kiln...YES! I'm off grid and to make that much power means cranking up my big diesel gennie, which isn't ideal. I've an old gas ceramic kiln which I could rebuild for glass I guess.

f

Hello. Can you help? I want to start doing it.. Could you tell me which tools, Soldering iron, ? Lead? thickness? black clay at the end? The thickness of lead and glass? What kind of company is lead? etc ..... I will be very grateful..

I have a question, if you don't mind. We have a huge antique mirror that we want to cut down. are there special considerations for cutting old thick glass? Thanks so much!

This was THE best tip- I was getting oil everywhere, lol Been doing this about 2 months now- thank you!

Hola pintamos los dibujos y a que temperatura lo horneamos

I wish they hired non Germans. That would be an absolute dream job.

Great video, thank you. Can I ask, what does the oil on the tip of the cutter do? What difference does it make if you don't use oil?

Thank you for putting yourself out there and showing the world your art and craft. I have learned so much from watching you!

I've been thinking about leveraging your knowledge for some time now. The in-person course is tough because of my current stage of life with 4 young children but want to build starting with the basics as to not have knowledge gaps even though I'm a bit more advanced. Appreciate what you're bringing to the market - that you recognize a need and see an opportunity.

Absolutely brilliant course

also may i say to the gal whose cylinder fell off the punty. i will never forget the first time that happened to me. utterly traumatic lol. for what its worth the pattern was beautiful AND quite close to your drawing. better luck next time miss.

ok now im done with the vid. and holy crap guys!!!! you made a completely artisanal version of lamberts glass. that is amazing! also a company called uroboros was part of the original system 96, and it was created by a guy who made sheets of glass to order for stained glass workers in the 1970s. your spirit of art glass is to be commended.

my focus was mixing kilnworked pattern bar techniques with traditional cane and murrine techniques. i hadnt really considered the potential to make sheets of glass from that, as sheet glass is typically a component OF that, but you know... theres some amazing possibilities for some cool sheets within what i did. exceptionally thought provoking

man id get so much joy out of making sheet glass for people like this. what a pleasure to see. i miss blowing glass.

Hi I really enjoy your channel I've learned so much one thing I need to know is where to get that Reusche oil paint medium you talk about

Christ I have bench in the corner of my shed.

So inspiring !!

I've only just discovered you as I want to get back into SG, years after learning at evening classes. I'm creating natural builds on my land in Cumbria, and all will have a plethora of SG in them. You're now my go-to for advice and inspiration.....thankyou so much for your channel.

Any recommendations for suppliers of everything?

I like the Mondriaan !!

You look like Brad Pitt 🎉 thanks for the videos!

Nice ad.

Fabulous! You both have thrown out the book of rules!!!

Brilliant advice. Thank you. 💕

I started getting into glass because I'm working on a memorial pice in honor of my mom. I just want to say thank you for being an amazing teacher 😃 also I hope it's not to much, can you give an update on your health? I just seen the video about you having cancer and my heart goes out for you 🧡 I can relate by understanding in a different way what you are going through. My mom was a cancer survivor but ultimately she never stopped fighting the battle because of the toll it had on her body. I just want you to know that you have been a great help and inspiration to many people. Thank you!

I'm a 4th generation stained glass artist and started teaching people interested in learning in classes offered at the American Arts and Crafts in St.Petersburg Florida. I noticed a great interest in the art and some students found a skill that they didn't know that they have. The classes are growing day after day and now I'm having glass fused classes that eventually these pieces could be incorporated into stained glass panels.

Thankyou for this. I've had trouble getting the glass to split evenly after making straight cuts. Don't think I've seen anyone else do the tapping with the butt-end of the cutter before. Worked perfectly!

Beautiful work, a beautiful Chateau De Colombe 300 year old tiny chapel needs 2 small windows... perhaps reach out 😊

Thank you Derek. Wonderfully clear introduction and well thought out video presentation to traditional stain glassing.